1、CLK-BH100 Main technical parameters of harmonic protector

Rated voltage: 110 v~ 690 v

Rated frequency: 50 hz / 60 hz

Protection grade: IP40 / can be mounted to IP54 suite

Temperature range: - 35 ℃ to 80 ℃

Height: 4000 m or less

Response time: us 100 or less, the entire response 10 ms or less

Overload protection: yes, and the front of the breaker

Communication protocol: RS485 module, the Modbus protocol

Frequency of protection: 1 KHZ ~ 20 MHZ Scope of protection: pulse current tolerance 15 or less

Ka Single loop high order harmonic current acuities were 40 a (n) 20 or more

Wet degree: ≤ 95%

Design life: 20 years

Power consumption: ≤0.1 W inst antaneous pressure,

impact pressure value is 2000 v

Leakage current: ≤ 1.321 mA

Manufacturing  standards , IEC61000 -4 -5 ,IEC60939-1-2

GB14549-93 _ utility grid power quality quality

GB12325-90 power quality _ to allow the power supply voltage deviation

2 、CLK - BH100 serieshar monic characteristics of protector

1, the use of Germany's most advanced manufacture craft, amorphous alloy materials

2, can aiming at 1 KHZ ~ 20 MHZ in the grid harmonic content of active absorption of governance

3, the inhibition of high frequency noise, pulse peak in the power grid, the surge current

4, at any time tracking voltage and current waveform, the waveform of the distortion correction

CLK - BH 100 series high ha rmonic protector function

1, dy namic h armonic fi lter a nd r eal-time a nalysis system, purification system, and the response speed

2, can filter out multiple harmonics at the same time, also can according t o t he set f or a specific order harmonics

3, can provide the current correction, regardless of the capacitive or inductive can output

4, can be used more weaver, provide different capacity

3、CLK - BH100 series harmonic protector applications

1 ． Extensiveuse of computers , switches ,communications equipment, such as stock exchange,bankbuilding , commercial office buildings ,communication base station, command center.

2．Exist larg e electronic dimming control system,single-phase rectifier equipment, large power amplifierdevices, fo r e xample, IMAX th eater, o pera sta ge,stadium, exhibition center, etc.

3．For electricity utilization has strict requirements and clean itself belongs to the class A units place, such as large hospitals, government buildings, public security fire control office building, etc.

4．Precision machining industry including nano and micro level processing industry; Such as cigarette industry, film industry, medicine, fine chemical industry,etc.

5．Other for electricity industry with special needs customers' requirement.

Note: CLK - BH100 series is mainly used in power distribution in the control circuit, can according to customer's own equipment and electrical characteristics, the importance of independent select installation location; Of higher harmonic  current  governance principle is: nearby at the same time take the effect of economic governance.